Products and Services

Mirra

Ring spacer diskus DK


Plastic spacer for lower reinforcement with a low contact point on the formwork. 1 Set consists of six single rings which can be separated. Ring diameter from 150 to 300 mm.

DesignationHeight (mm)Packet size - bag (sets)Pallet (sets)Bag (kg)Pallet (kg)
DK 151560 sets (set = 6 rings)on request6,5312
DK 202050 sets (set = 6 rings)on request6,8245
DK 252540 sets (set = 6 rings)on request7,0324
DK 303034 sets (set = 6 rings)on request7,5180
DK 353530 sets (set = 6 rings)on request--


Rhombus DE


Large area plastic spacer with a low contact point on the formwork. Used mainly in the precast concrete manufacture for horizontal reinforcement.

DesignationHeight (mm)Bundle (pcs)Pallet (pcs)Bundle (kg)Pallet (kg)
DE 15156092401,7264
DE 20206092401,9293
DE 25256092402,1324
DE 30306092402,3355
DE 35356079202,5330
DE 40406079202,7357
DE 45456052802,9256
DE 50506052803,1273


Mattenfix MT


Large area plastic spacer with clamps to fix at the reinforcement and with a low contact point on the formwork. Used mainly in the precast concrete manufacture for vertical and horizontal reinforcement.

DesignationHeight (mm)Bundle (pcs)Pallet (pcs)Bundle (kg)Pallet (kg)
MT 20201530001,2200
MT 25251527001,3135
MT 30301527001,5155
MT 35351524001,4175
MT 40401524001,2150
MT 45 451518001,3208
MT 50501518001,4168


Mattenfix with fastening MTH


Large area plastic spacer with clamps to fix at the reinforcement and with a low contact point on the formwork. Used mainly in the precast concrete manufacture for horizontal reinforcement and also for vertical reinforcement. Design with upper clamps for mounting on the valve.

Size 250 x 190 mm.

OznačeníKrytí (mm)Balení - svazek (ks)Paleta (ks)Svazek (kg)Paleta (kg)
MTH 15151530000,8160
MTH 20201530001,2200
MTH 25251527001,3135
MTH 30301527001,5155
MTH 35351524001,4175
MTH 40401524001,2150
MTH 45451518001,3156
MTH 50501518001,4168


Plastic chair spacer


Rugged plastic spacer with clamp fixture. Used at the cross point of the reinforcement, mainly in precast applications.

DesignationCover concrete (mm)To suit bar dia (mm)Bag (pcs)Pack (pcs)Pallet (ks)Bag (kg)Palet (kg)
Kozlík 15156 - 121000500080 0004,2336
Kozlík 20206 - 12500250050 0002,3230
Kozlík 25256 - 12500250050 0002,6260
Kozlík 30306 - 16500200040 0003,2256
Kozlík 35356 - 16250150030 0002,5300
Kozlík 40406 - 16250125030 0003,0360
Kozlík 45456 - 16125100020 0001,8288
Kozlík 50506 - 16125100020 0002,1336


Plastic clamp spacer Rufix RF


A clamp spacer in grey colour. Used for vertical rebar, mainly in precast applications.

 

DesignationConcrete cover (mm)To suit bar dia (mm)Bag (pcs)Pack (pcs)Bag (kg)Pack(kg)
RF 15155 - 14100050003,618,0
RF 20205 - 1450025002,010,0
RF 25255 - 1450025002,211,0
RF 30305 - 1450020002,49,6
RF 35355 - 1425015001,37,8
RF 40405 - 1425012501,57,5
RF 50505 - 1412510000,86,4


Plastic spacer Pyra


Plastic spacer with only one point touching the formwork. Used to connect and fix 2 bars at the cross point.

DesignationConcrete cover (mm)To suit bar dia (mm)Bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
Pyra 20205 / 6 - 8 mm100050002,713,0
Pyra 25255 / 6 - 8 mm100050002,814,0
Pyra 30305 / 6 - 8 mm100050003,015,0
Pyra 35355 / 6 - 8 mm100050003,116,0
Pyra 40405 / 6 - 8 mm100050003,216,0


Plastic feet spacer SO


Plastic clamp spacer for horizontal use in precast applications with low contact point on the formwork.

DesignationConcrete cover (mm)To suit bar dia (mm)Bag (pcs)Pack (pcs)Pallet (pcs)Bag (kg)Pack (kg)
SO 15155 - 145005000100 0001,010,0
SO 20205 - 145002500100 0001,57,5
SO 25255 - 14500250050 0002,010,0
SO 30305 - 14500200050 0002,510,0
SO 35355 - 14250100040 0001,56,0
SO 40405 - 14250100020 0001,757,0
SO 50505 - 14125100020 0001,18,8


Plastic spacer swallow VL


Spacer element with high stability suitable for placement of reinforcement and larger diameters. Use for vertical and horizontal reinforcement.

DesignationConcrete cover (mm)Pack (pcs)Pack (kg)
VL 1010500020,0
VL 1515360014,4
VL 2020220014,6
VL 2525180014,4
VL 3030140011,2
VL 3535130010,4
VL 4040110011,0
VL 454590012,0
VL 505080011,2


Trapeze Profile TL – hollow – length 2,5m


Plastic profile made from impact resistant PVC. Used to form slots or structures in ceilings or walls. Provided with nailing holes to fix at the formwork.

Supplied in lengths of 2,5 meters,

DesignationDimension a (mm)Dimension b (mm)Dimension c (mm)Pack size - bundle (m)Palet (m)Pallet (kg)
TL 20 10 102010101005400486
TL 20 15 102015101005400513
TL 30 20 153020151004200714
TL 35 20 35352035502100462


Corner trapeze profile TR – hollow – length 2,5m


Plastic profile made from impact resistant PVC. Used to begin with slots or structures at the end of ceilings or walls. Provided with nailing holes to fix at the formwork.

Supplied in lengths of 2,5 meters,

DesignationDimension a (mm)Dimension b (mm)Dimension c (mm)Pack size - bundle (m)Pallet (m)Pallet (kg)
TR 20 15 102015101005400486


Cover profile KL


Plastic profile made from impact resistant PVC in concrete grey colour. Used to fill or cover joints in the formwork. Provided with nailing holes to fix at the formwork.

Supplied in lengths of 2 meters.

DesignationWidth (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
KL 505050210014,0588
KL 656550210017,0714


T-profile


Reusable plastic profile made from impact resistant PVC. Used to cover small joints in the formwork.

Supplied in lengths of 2,5 meters,

DesignationWidth (mm)Height (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
PT 21 18211810056008,0448
PT 38 223822100490015,0735


Kicker profile U


Plastic profile made from impact resistant PVC. Used to adjust formwork at the base of the wall. Provided with nailing holes to fix at the base.

Supplied in lengths of 2 meters.

DesignationWidth (mm)Height (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
PU503020200010,01000


Flat profile PPL


Reusable plastic profile made from impact resistant PVC. Used to protect precast concrete parts during transport and storage.

Supplied in lengths of 2 meters.

DesignationWidth (mm)Heigth (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Palet (kg)
PPL 20/420410010 00011,71170
PPL 25/225210010 0007,2720
PPL 25/325310010 00010,81080
PLP 60/26021005 00015,0750
PPL 50/2 pružný502757,5


Edge guards profile PH


Reusable plastic profile made from impact resistant PVC. Used to protect edges of precast concrete units against damage during transport and storage.

Supplied in lengths of 2,5 meters.

DesignationLeg lengthPack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
PH201006 00010,0600


L-stripes SP


Plastic stripes in L-form used for storage of smaller concrete slabs. Allows air circulation between the slabs and avoids storage stains.

DesignationLength (mm)Pack size - box (pcs)Pallet (pcs)Box (kg)Pallet (kg)
SP 3603601 20058 8006,5318
SP 4604601 20043 2008,2246


Steckfix NF


Sturdy plastic spacer with very good concrete flow for main use in precast concrete manufacture. Low contact point on the formwork allows use as a fair-facedconcrete-spacer. Pieces in the length of 50 or 100 cm are assembled with a plug-in connection and can also be separated.

DesignationLength (m)Height (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
NF 15 / 1,01,0155060004,6552
NF 20/ 1,01,0205048004,9411
NF 25 / 1,01,0255042005,1367
NF 30 / 1,01,0305036005,3318
NF 35 / 1,01,0355030005,5264
NF 40 / 1,01,0404024004,8288
NF 45 / 1,01,0454024005,1275
NF 50 / 1,01,0504019205,4162
NF 60 / 1,01,0603018004,5180
DesignationLength (m)Height (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
NF 15 / 1,51,5157545006,9373
NF 20 / 1,51,5207536007,4311
NF 25 / 1,51,5257531507,7278
NF 30 / 1,51,5307527008,0288
NF 35 / 1,51,5357522508,3248
NF 40 / 1,51,5406018007,2216
NF 45 / 1,51,5456018007,5231
NF 50 / 1,51,5506014408,1195
NF 60 / 1,51,5604513506,8204
DesignationLength (m)Height (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
NF 15 / 2,02,01510060009,4564
NF 20 / 2,02,02010048009,8471
NF 25 / 2,02,025100420010,2428
NF 30 / 2,02,030100360010,6382
NF 35 / 2,02,035100300011,0330
NF 40 / 2,02,0408024009,6288
NF 45 / 2,02,04580240010,2306
NF 50 / 2,02,05080192010,8260
NF 60 / 2,02,0606018009,0270
DesignationLength (m)Height (mm)Pack size (m)Pallet (m)Bundle - (kg)Pallet (kg)
NF 15 / 2,52,515125750011,5621
NF 20 / 2,52,520125600012,3517
NF 25 / 2,52,525125525012,8460
NF 30 / 2,52,530125450013,3399
NF 35 / 2,52,535125375013,8414
NF 40 / 2,52,540100300012,0360
NF 45 / 2,52,545100300012,8384
NF 50 / 2,52,550100240013,5324
NF 60 / 2,52,56075225011,2336


Steckfix base spacer NFV


Sturdy plastic spacer with very good concrete flow for main use in precast concrete manufacture. Little stoppers on the top avoid the moving of the rebar. Low contact point on the formwork allows use as a fairfaced-concrete-spacer. Pieces in the length of 50 cm are assembled with a plug-in connection and can also be separated.

DesignationLength (m)Height (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
NFV 15 / 1,01,0155060005,1490
NFV 20 / 1,01,0205048005,4454
NFV 25 / 1,01,0255042005,5396
NFV 30 / 1,01,0305036006,0360
NFV 35 / 1,01,0354024005,2312
NFV 40 / 1,01,0404024005,6336
NFV 45 / 1,01,0453018004,4176
NFV 50 / 1,01,0503018004,6184
DesignationLength (m)Height (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
NFV 15 / 1,51,5157545007,6365
NFV 20 / 1,51,5207536007,9332
NFV 25 / 1,51,5257531508,1292
NFV 30 / 1,51,5307527008,3249
NFV 35 / 1,51,5356018007,2216
NFV 40 / 1,51,5406018007,8234
NFV 45 / 1,51,5454013506,3189
NFV 50 / 1,51,5504013506,6198
DesignationLength (m)Height (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
NFV 15 / 2,02,015100600010,2490
NFV 20 / 2,02,020100480010,5441
NFV 25 / 2,02,025100420010,8388
NFV 30 / 2,02,030100300011,0330
NFV 35 / 2,02,0358024009,6288
NFV 40 / 2,02,04080240010,4312
NFV 45 / 2,02,0456018008,4252
NFV 50 / 2,02,0506018008,7261
DesignationLength (m)Height (mm)Pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
NFV 15 / 2,52,515125750012,0576
NFV 20 / 2,52,520125600013,1550
NFV 25 / 2,52,525125525013,5486
NFV 30 / 2,52,530125450013,8414
NFV 35 / 2,52,535100300012,0360
NFV 40 / 2,52,540100300013,0390
NFV 45 / 2,52,54575225010,5315
NFV 50 / 2,52,55075225010,9327


Plain Shim pads UP 70 x 70 mm


Impact resistant hard plastic distance plates used as a support during the alignment of precast units. Available in a wide range of thickness.

Supplied in dimensions 70 x70 mm.

DesignationHeight (mm)Dimensions (mm)Bag (pcs)Pallet (pcs)Bag (kg)Pallet (kg)
UP 70 x 70 x 2270 x 70100040 0009,6384
UP 70 x 70 x 3370 x 70100040 00014,4576
UP 70 x 70 x 4470 x 7050020 0009,6384
UP70 x 70 x 5570 x 7050020 00012,0480
UP 70 x 70 x 6670 x 7050020 00014,4576
UP 70 x 70 x 7770 x 7050020 00016,8672
UP 70 x 70 x 8870 x 7025010 0009,6384
UP 70 x 70 x 9970 x 7025010 00010,8432
UP 70 x 70 x 101070 x 7025010 00012,0480
UP 70 x 70 x 121270 x 702008 00011,5460
UP 70 x 70 x 151570 x 702008 00014,4576
UP 70 x 70 x 202070 x 701506 00014,4576
UP 70 x 70 x 252570 x 701003 00012,0360
UP 70 x 70 x 303070 x 701003 00014,4432


Horseshoe shim pads UPV


Impact resistant hard plastic distance plates with slot used as a support during the alignment of precast units. Available in a wide range of thickness.

Supplied in diameters 70 x70 mm.

DesignationHeight (mm)Dimensions (mm)Bag (pcs)Pallet (pcs)Bag (kg)Pallet (kg)
UPV 22 70 x 70 / slot width 2225040 0001,9190
UPV 33 70 x 70 / slot width 2225040 0002,9290
UPV 44 70 x 70 / slot width 2212520 0001,9304
UPV 55 70 x 70 / slot width 2212520 0002,4384
UPV 66 70 x 70 / slot width 2212520 0002,9232
UPV 77 70 x 70 / slot width 2212520 0003,4272
UPV 88 70 x 70 / slot width 2212510 0003,9234
UPV 99 70 x 70 / slot width 2212510 0004,4264
UPV 1010 70 x 70 / slot width 2212510 0004,8288
UPV 1212 70 x 70 / slot width 22508 0002,3230
UPV 1515 70 x 70 / slot width 22508 0002,9290
UPV 2020 70 x 70 / slot width 22506 0003,8304
UPV 2525 70 x 70 / slot width 22503 0004,8192
UPV 3030 70 x 70 / slot width 22503 0005,8232


Hole Pads UPD


Hard plastic distance plates used as a support during the alignment of precast units. Pins and small matching holes give a good interlocking while staking the plates to achieve the necessary level. Filling the holes with cement avoids the slipping away of the pads and increases the strength. To avoid mistakes every size is produced in a different colour. Hole pads with a high compressive plastic (PC) are available on request.

Dimensions 50x70 mm.

DesignationConcrete cover (mm)Dimensions (mm) / ColorBag (pcs)Pallet (pcs)Bag (kg)Pallet (kg)
UPD 2250 x 70 / blue50030 0002,0120
UPD 3350 x 70 / red50025 0003,0150
UPD 5550 x 70 / black50025 0005,0200
UPD 101050 x 70 / black50020 00010,0400
UPD 202050 x 70 / black25010 00010,0400


Panel pads UPP


Sturdy plastic pads in a grey colour for storage of heavy precast concrete units. Allows air circulation between the concrete units and avoids storage stains.

DesignationDimensions (mm)Pack size - box (pcs)Pallet (pcs)Box (kg)Pallet (kg)
UPP170 x 6325010 00013,0520


Plastic wedges PK


Sturdy and durable plastic wedges are rust-resistant, noncorrosive and moisture resistant. Wedges have ribbed surface to prevent slippage and to interlock against each other.

DesignationDimensions (mm)Box (pcs)Pallet (pcs)Box (kg)Pallet (kg)
PK 70 30 1070 x 30 x 1050032 0003,0192
PK 85 44 1785 x 44 x 1720012 8002,8179
PK 135 44 25135 x 44 x 252504 5007,8140


Plastic Tube AR


Rigid plastic tubes with smooth or rough surface. Plastic tube is easy to cut to the required length. Used as a distance spacer in the formwork or as a sleeve over tie bolts. To save the formwork we advise the use of cones.

Supplied in 2 meter lengths.

DesignationInside dia (mm)Outside dia (mm)pack size - bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
AR 101610,516,55025007,0350
AR 141914195030006,0360
AR 1725172550245011,0660
AR 202420245024508,0392
AR 202520255024509,0441
AR 2026202650245011,0539
AR 22262226100300020,0600
AR 2228222850245013,5662
AR 2630263050210012,5525
AR 2631263150180013,0468
AR 2632263250180014,5479
AR 3036303630126012,0504
AR 323632363012607,5315
AR 3238323830126012,2512
AR 3440344030126013,2554
AR 404640463090017,5525
AR 45494549206008,2246
AR 50545054206009,2276


Plastic star-like tube ARH


Rigid plastic tube with star-like profile. The outside ribs of the tube gives a higher buckling resistance.

Supplied in lengths of 2 meters.

DesignationInside dia (mm)Outside dia (mm)Pack size . bundle (m)Pallet (m)Bundle (kg)Pallet (kg)
ARH 091891810050008,5425
ARH 10191019100500010,0500
ARH 13221322100500012,0600
ARH 2025203550210013,5567
ARH 2238223850210014,0588
ARH 2642264230126013,5567


Cones VK


Cones are used on both ends of the tie rods sleeves to increase the supporting surface at the formwork. Easy extraction of the cones after the removal of the formwork. Cones form a chamfered recess in the concrete for easy grouting. Available in a wide range of recess depths and for different sleeve diameters.

DesignationSleeve diameter (mm)Recess depth (mm)End dia (mm)Bag (pcs)Pack (pcs)Pallet (pcs)Bag (kg)
VK 14/10141033500-50 0002,0
VK 20/10 blue201039500-50 0002,5
VK 20/10 201039500300060 0002,5
VK 22/10 blue221039500300060 0003,5
VK 22/10 221039500300060 0003,0
VK 22/15221546500300045 0004,0
VK 22/25222543500-30 00010,0
VK 22/30223045250100030 0003,5
VK 22/5022504512550015 0003,0
VK 26/10 261048500-25 0004,0
VK 26/5026504512550015 0003,8
VK 32/10321048500-25 0004,2
VK 34/10341050500-20 0004,5


Stoppers ST


Conical plastic plugs to close sleeves or holes in formwork or concrete parts.

DesignationSleeve diameter (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
ST 0991000-1,0-
ST 10101000-1,0-
ST 13131000-1,2-
ST 14141000-1,4-
ST 15151000-1,4-
ST 16161000-1,6-
ST 17171000-1,8-
ST 18181000-1,8-
ST 19191000-2,0-
ST 2020100050002,412
ST 2222100040003,614,4
ST 26261000-4,8-
ST 3030500-3,3-
ST 3232500-4,0-


Opti caps SK


Cap in concrete grey colour used to produce the assembled version of the Opti Wall Spacers. The Opti system is tested for waterproof. Opti Caps are closed with Opti Stoppers.

DesignationTube dimension (mm)Pack size - bag (pcs)Pallet (pcs)Bag (kg)Pallet (kg)
SK 22 262650025 0005,0250
SK 22 282850025 0005,5275
SK 26 303050020 0006,5260
SK 32363650010 0009,0180


Opti stoppers SS


Stoppers in concrete grey colour to close the Opti Wall Spacers. The Opti system is tested for waterproof. Used to close Opti Wall Spacers and Opti Caps.

DesignationOpti system dimensions (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
SS 22 2622/26 a 22/2850025001,89
SS 26 3026/3050025002,613
SS 32 3632/3650025003,014,5


Rubber stoppers GZ


Elastic stopper to seal the inside of the sleeves against incoming water and as a backing where grouting is necessary.

DesignationTube diameter (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
GZ 202050025001,58
GZ 222250025001,89
GZ 262625010001,35
GZ 32321255002,510


Couplers RSR


Plastic coupler to connect plastic or concrete tubes.

DesignationSleeve diameter (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
RSR 222225010001,24,8


Seal caps KPD


Plastic cap to seal the sleeves at the formwork against the penetration of concrete into the tie rod. Also to protect the formwork against damage, if concrete tubes are used inside of the formwork.

DesignationSleeve diameter (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
KPD 222225020000,75,6


Cover caps KZ / Cover caps with holes KZO


Cap in concrete grey colour to close sleeves after removal of the cones. Available with holes inside to allow the pressure release while grouting.

DesignationSleeve diameter (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
KZ 222250050001,616
KZO 222250050001,515


Formwork Stoppers ZBS


Stopper to close holes with diameter 22 – 25 mm in timber shutters.

DesignationDimensions hole (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
ZBS 22-2522 - 2550050001,515


Plastic tie PN


Plastic Nail with barbed hooks to fix insulation material in the concrete.

DesignationLength (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
PN 757550050001,818,0
PN 909050050002,020,0
PN 10010050030002,213,2
PN 12512550025002,613,0
PN 15015050025002,814,0
PN 17517525020001,612,8
PN 20020012510001,29,6
PN 250250250-2,9-


Insulation board fixing UK


Two parts insulation board fixer for soft and hard insulation boards. Used in 8 mm drill holes in concrete, bricks or plaster. Head diameter is available in 45 or 90 mm.

DesignationDiameter (mm)Length (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
UK 45 60456012512500,88,0
UK 45 80458012512500,99,0
UK 45 1004510012512501,010,0
UK 45 1204512012512501,111,3
UK 90 60906012512501,313,0
UK 90 80908012512501,515,0
UK 90 1009010012512501,616,0
UK 90 1209012012512501,818,0


Plastic anchor for walls MH (with cross MHK, with stoppers MHS)


A Wall Anchor for fixing screws during the alignment of precast sandwich walls. Plastics anchor are a total rust-resistant economical alternative to stainless steel inserts. In the precast manufacture the anchor is  simply fixed with adhesive on the formwork. At the building site the walls are fixed with galvanised screw M12 x 70 or M12 x 90 to put them in the right horizontal level. After removing the adhesive plate you have a perfect chamfered recess in the concrete.

DesignationLength (mm)Pack size - bag (pcs)Pallet (pcs)Bag (kg)Pallet (kg)
MHK 8080 with cross50020 0009,0360
MHS 8080 with stoppers50020 0009,2368


Plastic inserts OP


A plastic insert for use with tie rods DG15. Suitable for climbing formwork or cantilever positioning. A total rust-resistant economical alternative to stainless steel inserts. Delivery with pre-installed nailing cones and special stoppers.

DesignationLength (m)Pack size - box (pcs)Pallet (pcs)Box (kg)Pallet (kg)
OP 70701006 4006,0384
OP 424220020 0002,0200
OP 404025025 0001,4140
OP 282810050 0000,5250


Plastic kicker SD


Round plastic kicker to adjust formwork at the base of the wall. Provided with several nailing holes to fix at the base. Also suitable for fixing off – centre, then adjusting direct to the formwork and fixing the kicker with a second nail. Available in a sturdy model or as a more cost-saving, lighter model.

DesignationDiameter (mm)Height (mm)PAck size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
SD-R 48 sturdy48301005003,015
SD-O 48 lighter48301005001,26


Plastic kicker with nail SDH


Round plastic kicker to adjust formwork at the base of the wall. Provided with several nailing holes to fix at the base. Also suitable for fixing off – centre, then adjusting direct to the formwork and fixing the kicker with a second nail. Available in a sturdy model or as a more cost-saving, lighter model.

DesignationDiameter (mm)Height (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
SDH-R 48 sturdy48301005003,518
SDH-O 48 lighter48301005001,89


Protection caps OKR


Rounded protection cap in bright colours to reduce the risk of injuries from protruding rebar.

DesignationBar size dia (mm)Pack size - pack (pcs)Pallet (pcs)Pack (kg)Pallet (kg)
OKR 06 166 - 1650025 0005,5275
OKR 16 3216 - 3225012 5005,5275


Fixing clips UKP


Sturdy plastic fixing clip with barbed hooks. Used for quick fixing of line spacers and rebar on soft bases like isolation boards. Mainly used in precasting plants.

DesignationDimension (mm)Pack size - box (pcs)Pallet (packs)Box (kg)Pallet (kg)
UKP 50502500140 0005,0280
UKP 12012070039 2003,4190
UKP 15015050028 0003,0168
UKP 20020050028 0001,584


Fir tree stoppers UH


Stopper in concrete grey colour to close holes in timber shutters. Used for holes up to maximum diameter of 20 mm.

DesignationDimensions hole (mm)Pack size - bag (pcs)Pack (pcs)Bag (kg)Pack (kg)
UH 20up to 20 mm50025001,256,25


Nailing plates RD


Reusable nailing plate for wooden formwork to fix sockets. Simply removable after striking the formwork.

DesignationColorThread dia (mm)Height (mm)Plate dia (mm)Pack size - bag (pcs)Pallet (pcs)Bag (kg)
RD 10blue10104010025 0000,52
RD 12orange12104010025 0000,56
RD 14white14104010025 0000,58
RD 16red16104010025 0000,61
RD 16.45red16105510012 0000,95
RD 18pink18105510012 0001,1
RD 20light green20105510012 0001,2
RD 24red24105510012 0001,3
RD 30green3010701006 0002,3
RD 36blue3610701006 0002,7
RD 42light gray421296504 0002,4
RD 52yellow521296504 0003,05


Plastic Rebar Chair


Suitable under heavy horizontal reinforcement.

DesignationCoverQuantity / BagWeight / Bag
PK2525/401002,8
PK5050/651004,3
PK7575/901006,8
PK8585/1001006,9
PK115115/120504,5
PK145145/150506


Hello,
please send me the price of the product:

Product Size Quantity (unit of measurement) Name of project Place Expected delivery Contact person, position, phone E-mail